Functions Of The Control Panel - Daewoo DWD-HB143 Series Service Manual

6. FUNCTIONS OF THE CONTROL PANEL

DWD-HB143**/HC123** (The 3rd Panel)
■
32
FUNCTIONS OF THE CONTROL PANEL
Press this switch to turn the power on or off.
Operation and temporary stop is repeated as it is pressed.
When you want to change program in operating;
Press the 'Start/Pause' button → Select the program that you want to change →
Press the 'Start/Pause' button again.
You can select the course you want, and each lamp is turned on when that course
is selected.
It can be used to pre-engage time for wash.
Reservation can be made from 1 hours to 19 hours.
This option is enabled with every course program.
Rinse+ • Is used to add a rinse, which may assist in removing traces of detergent residue.
• By selecting Rinse+ function, the rinse time and the rinse water are increased.
It can be used to adjust temperature of water according to types of the load to be
washed. As the button is pressed, temperature of water is selected by
0°C → 20°C → 40°C → 60°C → 95°C
By pressing the spin button, the spin speed can be chosen.
Rinse Hold • I s selected by pressing the spin button repeatedly. This function leaves clothes in
the machine; suspended in the water after a rinse without entering into spin.
• T o proceed through to a drain or spin, after the Rinse Hold function is completed,
use spin button.
example) If you select the Rinse hold, the light comes on display.
Spin Only • If you want only spin, you can operate spin only.
If the door is locked, the light comes on the display.