Error Code Displays; Specifications - Royal Sovereign RBC-3200-CA Owner's Manual

eRRoR CoDe DISPLAY
When an error code appears in the preset display window and the machine stops, please refer to the following chart for an explanation.
error code
E01
E02
E03
E04
E05
E06
E07
E09
EA0
EA1
EA2
EA3
If you are receiving error codes E01-E07 check the machine for dust. If you continue to receive error messages, please
contact Royal Sovereign's Service Center at 1-800-397-1025 or in Canada: 1-866-961-6673.

SPeCIFICAtIonS

Model
Power
Power consumption
Surroundings temperature of usage
Counting speed
Note-feeding size
Display range
Cubage
Net Weight
Left counting sensor
Right counting sensor
Left double-notes sensor
Right double-notes sensor
Note-receiving sensor
Note-feeding sensor
Width sensor
Sensor counting error. May be caused by a money jam. Carefully remove the bill by
moving the rubber foot wheel up and down. DO NOT TRY TO REMOVE THE BILL BY
PULLING OUT THE BILL AS YOU MAY RIP THE BILL AND ALSO DAMAGE THE UNIT
Half sheet. Eliminate the note. Press RESTART and count continuously.
Different width or different version notes. Press RESTART and count continuously.
Double-notes. Put the notes from the stacker onto the hopper again, press RESTART to
count again. If EA2 often appears, please adjust the position of the bill thickness adjuster.
Joined notes. Put the notes from the stacker onto the hopper again, press RESTART to count again.
100~240V 50/60Hz(1±5%)
<50W
32~104°F / 0~40°C
1200pcs/min.
4.3˝ × 2.0˝ ~ 9.8˝ × 7.7˝ / 110 × 50~185 × 90(mm)
four digits counting display, three digits preset display
10.6˝ × 9.8"˝ × 7.7" / 270 × 250 × 195(mm)
10.1 lbs / 4.6kg
9
RBC-3200-CA
Reason
RBC-3200-CA