Technical Characteristics; Product Information - Ariston AURES S 3.5 COM PL Manual

EN

TECHNICAL CHARACTERISTICS

For the technical specifications, refer to the nameplate (the nameplate is located on the right side
of the water heater).
Power
Voltage
Phases
Installation
Construction
Model
Frequency
Ampere
Water Protection
Pipe Connection
Minimum Water Pressure
Rated Volume (lt)
Weight
Dimensions
The product should be connected only to a supply with the relevant system
impedance no more than 0.237 ohm.
Restrictions to connection may be imposed by the supply authority on the use of
equipment in the actual relevant system impedance at the interface point on the
user's premise exceeds 0.237 ohm.
This appliance is conforming with the international electrical safety standards IEC
60335-1 and IEC 60335-2-35. When present, The CE marking of the appliances
attests its conformity to the following EC Directives, of which it satisfies the
essential requisites:
- LVD Low Voltage Directive: EN 60335-1, EN 60335-2-35, EN 60529, EN 62233, EN
50106.
- EMC Electro-Magnetic Compatibility: EN 55014-1, EN 55014-2, EN 61000-3-2, EN
61000-3-3, EN 61000-3-11 and EN 61000-3-12.
- ERP Energy related Products: Eu812, Eu814, EN50193-1-2013

PRODUCT INFORMATION

3.5kW
220-240
Mono
Refer to name plate
50/60hz
15.9
0.3 bar
400cc
1,350 gr
4
Over sink
Open Outlet
IP25
1/2" BSP
183x290x108 mm
5.5KW
220-240
Mono
50/60hz
25
0.3 bar
400cc
1,350 gr