The User Interface
The Product user interface is made up of a trigger, buttons, and a display. Use the buttons to
move through the various Product menu choices. Buttons and display messages are
described in Table 2.
Symbol
Body mode menu icon.
Body mode is for body-
temperature
measurements. Select On
body
or Off. Body mode is the
default mode of the
Product. See Figure 1.
°C / °F
Celsius or Fahrenheit. To change temperature units, push SEL until the
display shows only F or C and push SET to make the choice.
Table 2. Product Buttons and Display Messages
Meaning
Infrared Thermometer
Symbol
Denotes that the Product is
in Body mode. To change
to Surface mode, push SEL
body
until
b
then push SET.
disappears and the non-
adjusted surface
temperature measurement
is shown. See Figure 1.
The User Interface
Meaning
appears and
b
7