Factory Defaults - ZyXEL Communications ZyXEL ZyAIR B-4000 Quick Installation Manual

LED
PWR On (Green)
Off
WAN On (Green)
Blinking (Green)
Off
LAN (1-4) On (Green)
Blinking (Green)
Off
WIRELESS On (Green)
Blinking (Green)
SYS On (Green)
Blinking (Green)
Off

1.3 Factory Defaults

Username "admin" (case sensitive)
Password "1234"
ZyAIR B-4000
Figure 2 ZyAIR Front Panel
Table 2 Front Panel LEDs
STATUS
The ZyAIR is receiving power.
The ZyAIR is not receiving power.
The WAN port has a connection to your cable or DSL modem.
The WAN port is sending or receiving packets.
The WAN link is not ready, or has failed.
The port is connected to a 10/100Mbps Ethernet device.
The port is receiving or sending data.
The port is not connected to a 10/100Mbps Ethernet device.
The ZyAIR has established a wireless LAN connection.
The ZyAIR is sending/receiving data through the wireless LAN.
The ZyAIR is ready and running.
The ZyAIR is upgrading its firmware.
The ZyAIR is not ready or has failed.
Table 3 Factory Defaults
WAN IP Address
LAN IP Address
LAN DHCP
DESCRIPTION
DHCP Client (dynamic WAN IP)
192.168.1.1
Server
4