Test Your Internet Connection; Hardware Installation; Desktop Installation - ZyXEL Communications ZyXEL ZyAIR B-4000 Quick Installation Manual

Figure 23 Default Settings

3.5 Test Your Internet Connection

Launch your web browser and navigate to www.zyxel.com. Internet access is just the beginning.
Refer to the User's Guide for more detailed information on the complete range of ZyAIR features. If
you cannot access the Internet, open the web configurator again to confirm that the Internet settings
you configured in the Wizard Setup are correct.

4 Hardware Installation

The following sections describe the different installation options.
Leave adequate space on the rear and sides of the ZyAIR during hardware

4.1 Desktop Installation

1. Make sure the ZyAIR is clean and dry. Set the ZyAIR on a smooth space strong enough to
support the weight of the ZyAIR and the connected cables. Make sure there is a power outlet
nearby.
2. Make sure there is enough clearance around the ZyAIR to allow air circulation and the
attachment of cables and the power cord.
installation and do not block the ventilation holes.
ZyAIR B-4000
Select Keep subscriber profiles to set the system
configuration back to the factory defaults but retain
subscriber account information. All other custom
configuration is erased.
Under Reset the system back to factory defaults
Click Apply to reset the ZyAIR's configuration back
to the factory defaults (Table 3).
20