Top/Bottom Cabinet Block-1 - Sony HT-X9000F Service Manual

Note: Follow the disassembly procedure in the numerical order given.
2-2.

TOP/BOTTOM CABINET BLOCK-1

• Continued on 2-3 (page 10).
left side
top side
right side
3 Lift up the top cabinet
block in the direction
of the arrow.
Attach in order from 1 to 6.
1 First install the front side of the top
cabinet block as shown below.
top cabinet block
left side
3 Install the top cabinet
block in the direction
of the arrow.
top side
Turn over.
rear side
4 Remove the top cabinet block
in the direction of the arrow.
front side
Note: Install the top cabinet block on the left and right at the same time.
The figures below explain using illustrations of the left side.
2 Open to the outer side with your
fingers so that the corner of the
top cabinet block does not touch.
1 eight screws
(BVTP3 10)
2 two screws
(BVTP3
rear side
soft cloth, etc.
front side
top cabinet block
3 Lift up the top cabinet
block in the direction
of the arrow.
5 Slowly lower the top cabinet
block straight down.
top cabinet block
4 Check.
bottom cabinet block
HT-X9000F/XF9000
6)
front side
1 ten screws
(BVTP3
right side
left side
6 Push the top cabinet
block.
10)
Push.
9