Sk1 Led Board - Sony HT-X9000F Service Manual

2-4.

SK1 LED BOARD

Install the SK1 LED board on top of the speaker connection cable while holding down
the connector with your fingers so that the speaker connection cable does not rise.
Note 1: Check that the speaker connection
front side
left side
soft cloth, etc.
FFC (16P)
short
long
CN1302
The opposite side
is terminal side.
cable is in the two grooves.
–
front side
SK1 LED board
SK1 LED board
–
SK1 LED board
Hold down.
SK1-TOUCH board
–
4 FFC (16P)
(CN1302)
(See Fig. C)
hole
2 two screws
(BVTP3
hole
5 SK1 LED board
A
boss
3 Remove the SK1 LED board block
in the direction of the arrow.
boss
front side
A
top side
The opposite side
is terminal side.
CN1306
front side
FFC (6P)
–
SK1-TOUCH board
HT-X9000F/XF9000
Hold down.
8)
Note 2: When installing the SK1 LED board,
align the two bosses and two holes.
1 FFC (6P)
(CN1306)
top cabinet block
right side
11