Table of Contents
Advertisement
7
Camera/Android device: Follow the on-screen instructions.
Camera: Press J. The camera will
display a message stating that the
devices are connected.
Android device: Pairing is complete. Tap OK to exit to the
D
Pairing for the First Time
The first time you pair the Android device with a camera after
installing the SnapBridge app, you will be prompted to select auto
link (auto upload and auto clock and location synchronization)
options. This prompt will not appear again, but auto link settings
can be accessed at any time using Auto link in the
Pairing is now complete. The next time you use the SnapBridge
app, you can connect as described in "Connecting to a Paired
Device" (0 389).
D
Ending Bluetooth Connections
To end the connection to the smart device, select Disable for Connect
to smart device > Pairing (Bluetooth) > Bluetooth connection in
the camera setup menu.
382 Establishing Wireless Connections to Computers or Smart Devices
tab.
tab.
Advertisement
Table of Contents
Troubleshooting
