Table of Contents
Advertisement
Wi-Fi Connection
Connect to smart devices via Wi-Fi.
❚❚ Establish Wi-Fi Connection
Initiate a Wi-Fi connection to a smart device. To connect, select
the camera SSID on the smart device and enter the password
(0 371). Once a connection is established, this option will
change to Close Wi-Fi connection, which can be used to end
the connection when desired.
❚❚ Wi-Fi Connection Settings
Access the following Wi-Fi settings:
• SSID: Set the camera SSID.
• Authentication/encryption: Choose OPEN or WPA2-PSK-AES.
• Password: Set the camera password.
• Channel: Select Auto to have the camera choose the channel
automatically, or select Manual and choose the channel
manually.
• Current settings: View current Wi-Fi settings.
• Reset connection settings: Select Yes to reset Wi-Fi settings to
default values.
Send While Off
If On is selected, upload of images to smart devices connected
via Bluetooth will continue even when the camera is off.
Menu Guide > B The Setup Menu
319
Advertisement
Table of Contents
Troubleshooting
