Rule Summary - ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 User Manual

Table 37 Firewall: Default Policy (continued)
LABEL
Packet Direction
Default Action
Log
Back
Apply
Cancel

11.6 Rule Summary

Note: The ordering of your rules is very important as rules are applied in turn.
Refer to Section 10.1 on page 118
Click on Firewall, then Rule Summary to bring up the following screen. This screen is a
summary of the existing rules. Note the order in which the rules are listed.
Chapter 11 Firewall Configuration
DESCRIPTION
This is the direction of travel of packets (LAN to LAN/Router, LAN to WAN, WAN
to WAN/Router, WAN to LAN).
Firewall rules are grouped based on the direction of travel of packets to which they
apply. For example, LAN to LAN/Router means packets traveling from a
computer/subnet on the LAN to either another computer/subnet on the LAN
interface of the Prestige or the Prestige itself.
Use the radio buttons to select whether to Block (silently discard) or Forward
(allow the passage of) packets that are traveling in the selected direction.
Select the check box to create a log (when the above action is taken) for packets
that are traveling in the selected direction and do not match any of the rules below.
Click Back to return to the previous screen.
Click Apply to save your changes back to the Prestige.
Click Cancel to begin configuring this screen afresh.
for more information.
P-660H/HW/W-T Series User' Guide
136