ZyXEL Communications Bridge/Router G-2000s Quick Start Manual page 8

Select Internet Protocol (TCP/IP) and
4.
then click Properties.
Figure 5 Local Area Connection
Properties
Remove any previously installed gateways in the IP Settings tab and click OK to go back to the
8.
Internet Protocol TCP/IP Properties screen.
1
See the appendices for information on configuring DNS server addresses.
ZyAIR G-2000 Plus Quick Start Guide
5.
6.
7.
8
Select Use the following IP Address and
fill in an IP address (between
192.168.1.3 and 192.168.1.254).
Type 255.255.255.0 as the Subnet mask.
Click Advanced.
Figure 6 Internet Protocol Properties
1