Set Up Your Computer's Ip Address - ZyXEL Communications Bridge/Router G-2000s Quick Start Manual

LED COLOR
LAN 1-4
Green
Orange
WAN
Green
Orange
SYS
Green
Red
PWR
Green
To access the ZyAIR, configure your computer's IP address and subnet mask to be in the same range as the
ZyAIR's.

3 Set Up Your Computer's IP Address

The ZyAIR is already set up to assign your computer an IP address. Use this section to set up your
computer to receive an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254 range
with a subnet mask of 255.255.255.0. This is necessary to ensure that your computer can communicate with
your ZyAIR.
ZyAIR G-2000 Plus Quick Start Guide
Table 1 ZyAIR Front Panel LED Description
STATUS
On The ZyAIR is ready, but is not sending/receiving data.
Off The LED has been disabled in the web configurator or SMT.
Off The Ethernet connection is not ready, or has failed.
On The ZyAIR has a successful 10Mbps Ethernet connection.
Blinking The ZyAIR is sending/receiving data.
On The ZyAIR has a successful 100Mbps Ethernet connection.
Blinking The ZyAIR is sending/receiving data.
Off The ZyAIR does not have a WAN connection.
On The ZyAIR has a successful 10Mbps WAN connection.
Blinking The ZyAIR is sending/receiving data.
On The ZyAIR has a successful 100Mbps WAN connection.
Blinking The ZyAIR is sending/receiving data.
Off The ZyAIR is not ready or has malfunctioned.
On The ZyAIR is functioning properly.
Blinking The ZyAIR is rebooting.
Off The ZyAIR is not receiving power.
On The ZyAIR is receiving power.
The default IP address of the ZyAIR is 192.168.1.1
DESCRIPTION
6