ZyXEL Communications Bridge/Router G-2000s Quick Start Manual page 15

This wizard screen has three variations depending on what encapsulation type you use. Use the
5.
information in Internet Account Information to fill in fields.
Choose PPTP if your service provider uses a DSL terminator with PPTP login. The ZyAIR must have a static IP address in
this case. You'll also need a login name, associated password, the DSL terminator IP address and possibly a connection ID.
Click Next to continue.
If you change the ZyAIR's IP address, you must use the new IP address if
This is the final wizard screen you need to configure. Fill in the fields and click Next to go to the
6.
last wizard screen.
ZyAIR G-2000 Plus Quick Start Guide
you want to access the web configurator again.
Pre-Shared Key
Type a pre-shared key to have a more
secure wireless connection than WEP
encryption.
Type from 8 to 63 case-sensitive ASCII
characters.
You can set up the most secure wireless
connection by configuring WPA in the
advanced wireless screen. You need to
configure a RADIUS server to do this.
Choose Ethernet when the WAN port is
used as a regular Ethernet. Choose from
Standard or a RoadRunner version.
You'll need User Name, Password and
Login Server IP Address for some
Roadrunner versions.
PPPoE or Point-to-Point Protocol over
Ethernet (PPP over Ethernet) also
functions as a dial-up connection.
Therefore you'll also need a username
and password and possibly the PPPoE
service name.
Your ISP will give you all needed
information.
15