ZyXEL Communications ZyXEL ZyAIR B-1000 User Manual page 91

LABEL
Get automatically
Use fixed IP address
IP Address
IP Subnet Mask
Gateway IP Address
Apply
Reset
IP
Table 8-2 IP Setup
Select this option if your ZyAIR is using a dynamically assigned IP address from
a DHCP server each time.
You must know the IP address assigned to the ZyAIR (by
the DHCP server) to access the ZyAIR again.
Select this option if your ZyAIR is using a static IP address. When you select
this option, fill in the fields below.
Enter the IP address of your ZyAIR in dotted decimal notation.
If you change the ZyAIR's IP address, you must use the
new IP address if you want to access the web
Type the subnet mask.
Type the IP address of the gateway. The gateway is an immediate neighbor of
your ZyAIR that will forward the packet to the destination. On the LAN, the
gateway must be a router on the same segment as your ZyAIR; over the WAN,
the gateway must be the IP address of one of the remote node.
Click Apply to save your changes back to the ZyAIR.
Click Reset to begin configuring this screen afresh.
ZyAIR Access Point Series User's Guide
DESCRIPTION
configurator again.
8-3