ZyXEL Communications ZyXEL ZyAIR B-1000 User Manual page 222

ZyAIR Access Point Series User's Guide
FTP Login
Successfully
FTP Login Fail
NAT Session Table is
Full!
TYPE CODE
0
0
3
0
1
2
3
4
5
4
0
5
0
1
2
3
N-2
Chart N-2 System Maintenance Logs
Someone has logged on to the router via FTP.
Someone has failed to log on to the router via FTP.
The maximum number of NAT session table entries has been
exceeded and the table is full.
Chart N-3 ICMP Notes
Echo Reply
Echo reply message
Destination Unreachable
Net unreachable
Host unreachable
Protocol unreachable
Port unreachable
A packet that needed fragmentation was dropped because it was set to Don't
Fragment (DF)
Source route failed
Source Quench
A gateway may discard internet datagrams if it does not have the buffer space
needed to queue the datagrams for output to the next network on the route to
the destination network.
Redirect
Redirect datagrams for the Network
Redirect datagrams for the Host
Redirect datagrams for the Type of Service and Network
Redirect datagrams for the Type of Service and Host
DESCRIPTION
Log Descriptions