Appendix A Product Specifications
Table 10 Firmware Specifications
FEATURE
Powerline Functionality
Encryption
Frequency Band
Certifications
Device Management
Network Password
Firmware Upgrade
Table 11 Performance
FEATURE
Throughput over PHYsical Transport
Medium (PHY)
Throughput over UDP
Number of devices in one powerline
network
The following list, which is not exhaustive, illustrates the standards supported in the PLA-4xx.
Table 12 Standards Supported
STANDARD
HomePlug AV
RFC 868
RFC 1112
RFC 1157
RFC 1901
RFC 2236
52
DESCRIPTION
The HomePlug AV standard specifies how network devices
communicate using standard electrical wiring.
It supports a data transfer rate of up to 200Mbps.
Data is encrypted using 128-bit AES (Advanced Encryption Standard).
HomePlug AV compatible devices co-exist with HomePlug 1.0 devices
but do not detect each other.
The range of a HomePlug AV network is 300 meters/984 feet in optimal
conditions.
HomePlug AV is compatible with all OSs.
The maximum number of powerline devices on a single network is 16.
Support for 64 devices communicating on a single network is planned for
future firmware release.
128-bit AES Encryption
1.8 MHz ~ 30 MHz
FCC, CE, CUL, UL, HomePlug AV, RoHS
Use the PLA-4xx Series Configuration Utility to easily configure the PLA-
4xx.
Change the powerline network password to only allow the powerline
adapters you specify to join your network.
Download new firmware (when available) from the ZyXEL website and
use the configuration utility to install it.
Note: Only upload firmware for your specific model!
DESCRIPTION
Supports up to 200 Mbps in half duplex mode
Supports up to 150 Mbps over in-house power/coaxial
lines (LAN port limits to 100 Mbps)
Supports up to 64 devices in 4 network groups
DESCRIPTION
Designed for transmitting audio/video on a home powerline network.
Time Protocol.
IGMP v1
SNMPv1: Simple Network Management Protocol version 1
SNMP v2c Simple Network Management Protocol version 2c
Internet Group Management Protocol, Version 2.
PLA-4xx Series User's Guide