Setting Up A New Network With A New Adapter; Figure 25 Add New Adapters To Make A Second Network - ZyXEL Communications ZyXEL PLA-400 User Manual

4.0.5 Setting Up a New Network with a New Adapter

This section shows you how to use your new powerline adapters to set up a new powerline
network separate to your existing network.
The figure below shows two powerline networks in a house. The first network (1) shows the
home computer connected to a printer and access to the Internet. The second network (2) has
no Internet access but with a media adapter such as the ZyXEL DMA-1100P you can use your
TV to watch movies and play games which are stored on a computer.

Figure 25 Add New Adapters to Make a Second Network

1 Connect your new powerline adapter and open the configuration utility as shown in
Section 4.0.5 on page
2 Type a Network Password (NMK) that is different from the Network Password
(NMK) for your existing network. Make sure you use the same new Network Password
(NMK) for all new adapters you want to add to your new network.
PLA-4xx Series User's Guide
Chapter 4 Powerline Network Setup Tutorial
1
2
37. The screen shown below appears.
Internet
37