Phone Setup - Cisco 7800 Series Manual

Your Phone
The following table shows the changes made for Firmware Release 11.0(1).
Table 10: Cisco IP Phone 7800 User Guide revisions for Firmware Release 11.0(1).
Revision
Added the following section for Problem Report Tool
support
Revised the following sections for cBarge and Barge
Revised the following sections for Do Not
Disturb(DND)
Feature Support
This document describes all the features that the device supports. However, not all features may be supported
with your current configuration. For information on supported features, contact your administrator.

Phone Setup

Your administrator sets up your phone and connects it to the network. If your phone is not set up and connected,
contact your administrator for instructions.
Adjust the Handset Rest
If your phone is wall-mounted or if the handset slips out of the cradle too easily, you may need to adjust the
handset rest to ensure that the receiver does not slip out of the cradle.
Figure 2: Adjust the Handset Rest
Updated Section
Report All Phone Issues , on page 20
Shared Lines
Turn On Do Not Disturb
Your Phone
Feature Support
5