Plantronics Discovery 650 User Manual page 10

Bluetooth headset with digitally-enhanced sound for clear conversations

Hide thumbs Also See for Discovery 650:

Table of Contents

CHARGING

PLANTRONICS DISCOVERY 650

Before using, you must first charge your headset.

1 hour = minimum charge

3 hours = full charge

OPTION A: USING THE INCLUDED AC CHARGER

The indicator light glows red while charging and turns off

when fully charged.

1. Plug the AC charger into the base of the charging pocket

and connect it to your power source.

2. Insert the headset into the charging pocket.

OPTION B: USING A AAA BATTERY

One AAA battery recharges the headset to full capacity.

1. Twist the bottom of the AAA battery charger counter-

clockwise and release the battery holder.

2. Insert the battery into the AAA battery holder.

3. Slide the battery holder back into the battery charger and

turn clockwise.

4. Snap battery charger to charging pocket.

Ensure that the indentation on the battery

charger connector aligns with the shirt clip on

the charging pocket.

5. Insert the headset into the charging pocket.

CAUTION

Only replace with a non-rechargeable AAA battery.

* DISCONNECTING COMPONENTS

To separate components, grasp both the battery charger and

the charging pocket with the shirt clip facing you. Bend the

components back and they will snap apart.

NOTE

CHARGING

Do not twist the components apart.

Table of Contents