Trend Chart; Figure 28 Station Mode: Link Info: Trend Chart - ZyXEL Communications G-220 v3 User Manual

Table 3 Station Mode: Link Info (continued)
LABEL
Channel
Status
Statistics
Transmit Rate
Receive Rate
Authentication
Network Mode
Total Transmit
Total Receive
Link Quality

Trend Chart

Signal Strength
Link Quality
4.2.1 Trend Chart
Click Trend Chart in the Link Info screen to display a screen as shown below. Use this
screen to view real-time data traffic statistics.

Figure 28 Station Mode: Link Info: Trend Chart

Chapter 4 Wireless Station Mode Configuration
DESCRIPTION
This field displays the radio channel the G-220 v3 is currently using.
This field displays the authentication type of the wireless network.
This field displays the current data transmission rate in kilobits per second (Kbps).
This field displays the current data receiving rate in kilobits per second (Kbps).
This field displays the authentication method of the G-220 v3.
This field displays the wireless standard (B or G) of the AP or peer computer.
This field displays the total number of data frames transmitted.
This field displays the total number of data frames received.
This field displays the signal strength of the G-220 v3.
Click this button to display the real-time statistics of the data rate in kilobits per
second (Kbps).
The status bar shows the strength of the signal. The signal strength is mainly
depending on the antenna output power and the distance between your G-220 v3
and the AP or peer computer.
The status bar shows the quality of wireless connection. This refers to the
percentage of packets transmitted successfully. If there are too many wireless
stations in a wireless network, collisions may occur which could result in a loss of
messages even though you have high signal strength.
ZyXEL G-220 v3 User's Guide
53