The Link Info Screen; Figure 27 Station Mode: Link Info; Table 3 Station Mode: Link Info - ZyXEL Communications G-220 v3 User Manual

ZyXEL G-220 v3 User's Guide

4.2 The Link Info Screen

When the ZyXEL utility starts, the Link Info screen displays, showing the current
configuration and connection status of your G-220 v3.

Figure 27 Station Mode: Link Info

The following table describes the labels in this screen.

Table 3 Station Mode: Link Info

LABEL
AP Mode
Station Mode
Wireless Network
Status
Profile Name
Network Name
(SSID)
AP MAC Address
Network Type
Transmission Rate This field displays the current transmission rate of the G-220 v3 in megabits per
Security
52
DESCRIPTION
Use the check box to set the G-220 v3 to operate in wireless station or access
point mode. Refer to Section 1.2.4 on page 25
This is the name of the profile you are currently using.
The SSID identifies the wireless network to which a wireless station is associated.
This field displays the name of the wireless device to which the G-220 v3 is
associated.
This field displays the MAC address of the AP or peer computer to which the G-220
v3 is associated.
This field displays the network type (Infrastructure or Ad-Hoc) of the wireless
network.
second (Mbps).
This field displays whether data encryption is activated (WEP (WEP or 802.1x),
TKIP (WPA/WPA-PSK/WPA2/WPA2-PSK), AES (WPA/WPA-PSK/WPA2/WPA2-
PSK)) or inactive (DISABLE).
for more information.
Chapter 4 Wireless Station Mode Configuration