Installation Requirements - ZyXEL Communications 802.11g Wireless USB Adapter ZyXEL G-200 Quick Start Manual

802.11g wireless usb adapter
Table of Contents

Advertisement

About Your ZyXEL G-200
The ZyXEL G-200 is an IEEE 802.11g compliant wireless USB Adapter that
connects to USB ports on desktop or notebook computers. With the ZyXEL G-200,
you can enjoy the wireless mobility within the coverage area. The IEEE 802.11g
technology provides greater range and offers transmission rate at up to 54 Mbps.
Actual speeds attained also depend on the distance from the AP, noise, etc.

1. Installation Requirements

Before installation, make sure you have a computer with the following:
Pentium II 300MHz or above
A minimum of 20 MB available hard disk space
32MB RAM (64MB Recommended)
A CD-ROM drive
A USB port (with USB1.0/1.1, the ZyXEL G-200 can only transmit up to
11Mbps.)
Windows XP or 2000 Operating Systems
Windows XP Users
Wireless Zero Configuration (WZC) is a wireless configuration utility bundled with
Windows XP. If you are a Windows XP user and wish to use WZC instead of the
bundled ZyXEL Utility, then you can either:
Install the ZyXEL Utility and then disable it (selecting
"Use Windows Zero Configuration" by first right clicking
ZyXEL G-200 Quick Start Guide
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

G-200

Table of Contents