Removing Lower Spray Arm And Manifold Assembly - Whirlpool M-17 Technical Manual

COMPONENT ACCESS (Cont.)

Removing Lower Spray Arm and Manifold Assembly

Remove Lower Spray Arm
1. Open the dishwasher door.
2. Complete the steps 1-5
section.
3. Complete the steps 1-6
Rack" section.
4. To remove lower spray arm lift up and turn counterclockwise.
Remove Filter Cover
5. To remove filter cover remove four TORX T15 screws.
4-14 Whirlpool and KitchenAid
n
®
from "Removing the Upper Rack"
from "Removing the Third Level
Filtration and Maytag
®
Remove Manifold Assembly
6. To remove manifold assembly remove two TORX T15 screws
at diverter cover.
7. Starting at the top, use a flat blade screwdriver to press in on
the four tabs. The manifold assembly can then be removed
from the tub.
24" Microfiltration Dishwashers
®