Setting Up Your Computer
This section illustrates how to set up and install your computer and peripheral
devices.
Attach the stand to the system unit
1
Place the system unit upside down, with the front of the system facing
towards you.
2
Insert the stand pegs into the ventilation holes of the system. Place the wider
end of the stand at the rear of the unit as shown below.
3
Lock the stand onto the system unit by pressing down gently and pulling
forward slightly. The stand clicks into place.
Attaching the Slimtop stand
✍
The stand keeps the system cool by allowing air to flow under it. It is important to
place the system unit in an an upright position using the stand correctly, to avoid
overheating of the system unit.
Setting Up Your Computer
7