Advertisement
Regulatory Information (Updated March 1999)
Safety Considerations
GENERAL
This product a n d related documentation m u s t be reviewed for familiarization
with
safety
markings a n d instructions before operation.
This product
has
been designed a n d tested i n accordance with
IEC Publication 1010,
"Safety Requirements for Electronic Measuring Apparatus," a n d
has
been supplied
in a
safe condition. This instruction documentation contains information a n d warnings which
must be followed by t h e user to e n s u r e safe operation a n d to maintain t h e product
in a
safe
condition.
SAFETY
EARTH
GROUND
A uninterruptible safety e a r t h ground
must
be provided from the main power source to t h e
product input wiring terminals, power cord, or supplied power cord set.
SAFETY SYMBOLS
A
Indicates instrument damage can occur if indicated operating limits a r e exceeded.
A
Indicates hazardous voltages.
4
-
Indicates e a r t h (ground) terminal
WARNING
A WARNING note denotes a hazard. It calls attention to a procedure,
practice, or the like, which, if not correctly performed or adhered to,
could result in personal injury. Do not proceed beyond a
WARNING
sign until the indicated conditions are
fully
understood and met.
CAUTION
A CAUTION note denotes
a
hazard.
It
calls attention to an operation
procedure, practice, or t h e like, which, if not correctly performed or adhered
to, could result i n damage t o or destruction of part or
all
of the product.
Do
not proceed beyond an CAUTION note
until
t h e indicated conditions
are
fully
understood a n d met.
2
Chapter 1
Advertisement
