Zoom MRT-3 Operation Manual page 34

5.
To proceed to the next step, press the [REC] key.
The last two digits of the display now show the second step number, and the first two digits
show "EE" which indicates the end of the song. In this condition, you can select the pattern
for the second step.
H
INT
• By holding down the [SONG] key while pressing the [VALUE +/-] keys, you can move back and
forth among steps.
• When there is not enough remaining free memory in the MRT-3, the indication "FULL" appears on
the display, and further recording is not possible. Erase unneeded songs.
6.
Use the [VALUE +/-] keys to assign a pattern to the second step.
7.
Repeat steps 5 – 6 to create the entire song.
One song can have up to 99 (01 – 99) steps (patterns).
8.
If you want to insert a step in a song, select the step where you want to insert a
pattern, and press the [INSERT/COPY] key.
A new step is inserted before the currently selected step, and subsequent steps are shifted
one count back. Select the pattern for the inserted keys with the [VALUE +/-] keys as
necessary.
9. To delete a step from a song, select the step and press the [DELETE/ERASE] key.
The currently selected step is deleted, and subsequent steps are shifted one count forward.
34
MRT-3
ZOOM
Pattern A Pattern B
Pattern A Pattern B
Indicates the last step of the song
E E 0 2
Pattern E
Insert
Pattern C Pattern D
Pattern E Pattern C Pattern D