Table of Contents
Advertisement
Step 3. To release the previous IP settings in your computer, run the command "ipconfig /
release." (Figure A-39)
Step 4. To obtain new IP settings from WPD –140, run "ipconfig / renew." As listed below, the
IP address is your client computer's LAN IP address, and the Default Gateway is
ZSR0104C SERIES IP address. Make sure that your IP Address is 192.168.1.xxx (xxx
ranges from 2 to 254), your Subnet Mask is 255.255.255.0, and your Default Gateway is
192.168.1.1. These values confirm that your ZSR0104C SERIES is functioning. (Figure
A-40)
Figure A–39
Figure A–40
Page 47
Advertisement
Table of Contents
