Fixed-Ip Xdsl Connection - Zonet ZSR0104C Series User Manual

The default WAN Setting of ZSR0104C SERIES is Cable Modem Connection without
Host Name and MAC Clone
If you don't know the MAC address of your Network Interface Card, follow the steps
to obtain the information. The MAC address information might be helpful when you
need to use MAC Clone.
1. Go through the path "Start -> Run" and enter "command" to enable the Command
Prompt Window.
2. Enter " ipconfig/all". Find the item Physical Address and this is the MAC address
of your Network Interface Card.
B. Fixed-IP xDSL Connection
If Internet access is through the Fixed-IP, please click the selection button of
The" Fixed-IP xDSL". Then click "Next" button.
Page 12