Advertisement
Official Recall Notification United States Federal Boat Safety Act—Mercury Diesel 3.0L Tier III Turbocharger Oil Supply Line
3.
Remove the engine cover.
e
f
d
4.
Remove the banjo bolt securing the oil supply line to the turbocharger.
THE INFORMATION IN THIS DOCUMENT IS CONFIDENTIAL AND PROTECTED BY COPYRIGHT AND IS THE PROPERTY OF MERCURY MARINE.
This document is provided for the sole and exclusive use of the original recipient as prescribed by Mercury Marine and may not be distributed or copied, digitally or
otherwise, without the prior written consent of Mercury Marine.
2014-68 NOVEMBER 2014
a
b
b
c
Banjo bolt being removed
Component locations
a -
Oil filter, shown capped (refer to following steps)
b -
Turbocharger oil line
c -
Fuel metering valve connector
d -
Oil line retainer flange and retaining screw (not
visible, but located beneath fuel lines)
e -
Turbocharger oil line banjo bolt
f -
Antirotation screw
57351
© 2015 Mercury Marine
57252
Page 3 / 12
Update
Advertisement
