Sleep Timer; Tilt Function; Clearing Blockages - Dyson Pure Hot + Cool Link HP02 Operating Manual

Sleep Timer

The sleep timer will
turn your appliance
off once the time
set has passed.
To set the sleep timer, select the desired time. When time reaches
zero, the appliance will go into standby mode. To cancel,
increase the time until two dashes appear.

Clearing blockages

Ensure the appliance is unplugged. If the appliance has been in use, leave for 1 to 2 hours in order to allow the appliance to cool down
completely. Look for blockages in the air inlet holes and in the small aperture inside the air loop amplifier. Use a soft brush to remove debris.
Cleaning
Unplug from the mains electricity supply. If the appliance has been in use, leave for 1 to
2 hours before cleaning to allow the appliance to cool completely. Dust may accumulate
on the surface of the machine. Wipe dust from the loop, filter unit and other parts with a
dry or damp cloth when dust accumulates. Do not use detergents or polishes.

Tilt function

Carefully hold the base and the main body. Tilt the amplifier
forward or backward for the required airflow angle.
Caution: Hot when in use
This appliance is hot when in use and for a
short period after use. Do not let bare skin
touch hot surfaces. If children are present,
consider positioning the appliance out of
their reach.
53