2 0 0
H o u r S e r v i c e
1
Install and tighten the Charger 2 Damper into the upper tube.
Install and tighten the Charger 2 Damper into the upper tube.
2
Some damper top caps have a groove around the hex adjuster.
Some damper top caps have a groove around the hex adjuster.
Damper top caps with a groove must be used with a spool that also
Damper top caps with a groove must be used with a spool that also
has a groove.
has a groove.
Proceed to the next step if your top cap and spool have a groove.
Proceed to the next step if your top cap and spool have a groove.
Proceed to Step 4 i
Proceed to
Step 4 if your top cap and spool do not have a groove.
f your top cap and spool do not have a groove.
C h a r g e r 2 D a m p e r I n s t a l l a t i o n - R e m o t e
24 mm
Groove
Top Cap with Groove
Top Cap without Groove
Charger 2 Damper Installation - Remote
28 N.m (250 in-lb)
Groove
Spool with Groove
Spool without Groove
48