Operation; Power On/Off - Profoto A10 User Manual

Operation

Mounted in the camera hot shoe, the A10 unit acts both as an on-camera
flash and as a wireless extension of your camera to your Profoto off-
camera flashes, combining TTL (Through-The-Lens) exposure control
with the option to manually adjust and sync your Profoto flashes.
The A10 can also be used as a flash for your mobile camera using the
Profoto Camera App. See chapter Profoto Camera and Control apps.

Power on/off

23
• Push the ON/OFF button [12] to switch on the A10.
• Push and hold the ON/OFF button [12] to switch off the A10.
When the A10 is switched off, the current settings are stored and will
apply when the unit is switched on again.
To save battery, the A10 automatically enters standby mode after a
period of inactivity (selectable via the standby setting) and switches
off completely after 90 minutes. These functions can be deactivated
via the standby setting.
In this automatically entered standby mode, the display [9] and test
button [12] are switched off. To return to operational mode, push any of
the A10 buttons or use the camera.
Note:
When the standby and auto power off functions are deactivated, the battery will drain
in approx. 8 hours of inactive use.
www.profoto.com