Table of Contents
Advertisement
Precautions for use
This product is a 12G-SDI signal compatible interface board for use installed
in a Panasonic projector.
Supported projector
PT-SRQ32KC, PT-SRQ13KC, PT-SRQ22KC
(As of March 2019)
Note
f Products other than the above may also be supported. Check the Operating Instructions of
your projector.
f If the main version of the firmware of the PT-SRQ32KC, PT-SRQ13KC is less than 3.00, this
interface board cannot be used. For details, contact your dealer.
About the handling of the product
r Do not touch the connector section of the Interface Board
directly with your hands.
The component may be damaged by the static electricity. Handle this
product after removing the static in your body by touching the surrounding
metal, etc.
Disposal
To dispose of the product, ask your local authorities or dealer for correct
methods of disposal.
Accessories
Make sure that the following accessories are provided with your product.
Numbers enclosed in < > show the number of accessories.
Screw <4>
(XSB3+8FN)
Attention
f Appropriately discard the packaging material after unpacking the product.
f For missing accessories, consult your dealer.
f Store small parts in an appropriate manner, and keep them away from small children.
Precautions for use
ENGLISH - 5
Advertisement
Table of Contents
