Advertisement
step
3
�
Figure 3
Parts:
• Cross Brace (#1)
• Left Stand Leg assembly from Step 1
• Right Stand Leg assembly from Step 2
Hardware
• 3" Screws (#12)
• Washers (#11)
• Nuts (#10)
Tools:
• Hex Key (7/32")
3-1 Attach the Bottom Cross Brace (#1) to the Rear Left Stabilizer (#2) and Rear Right Stabilizer (#3)
using the hardware shown in Figure 3. Make sure that the narrower edge of the Cross Brace
(#1) is closer to the Stand Leg (#4) uprights.
Note: Do not tighten hardware.
6
�
��
��
��
�
Qty
4
8
4
�
�
Advertisement
