Samsung WF455ARG Series Training Manual page 30

3. Disassembly and Reassembly
3-2. Standard disassembly drawings
► This is a standard disassembly diagram and may differ from the actual product.Use this material as a reference
when disassembling and reassembling the product.
Part Figure Description
1.Seperate the 3 bolts
2. Seperate the Connection Housing(3).
Remove the nut holding the heater and the heater.
DOOR-LOCK S/W
3. Remove the heater from the Tub.
◆ Caution
Make sure to insert the Heater into the correct position of the bracket
inside the Tub when reassembling it. Otherwise, there is a risk of fire.
Make sure to push it inwards until the packing part comes into the
Tub completely when reassembling it so that the packing part is
completely stuck to the Tub.Fasten the holding nut with a force of
5Kgf/ cm2.If the nut is not fastened properly, there is a risk of water
leaking.
29/54