3. Disassembly and Reassembly
3-2. Standard disassembly drawings
► This is a standard disassembly diagram and may differ from the actual product.Use this material as a reference
when disassembling and reassembling the product.
Part
Figure
Description
The Hook type water level sensor
► Disassembly
1. Separate the Top Assy-Plate.
WATER LEVEL
SENSOR
(The Hook type)
1. To remove the water lever sensor, push it slowly in the direction of
the arrow shown in the figure on the left.
※ Since this disassembly method uses the elasticity of the water
level sensor hook, imposing too strong a force may damage it.
2. While a force is imposed on the water lever sensor as directed in
step 1, pull the hook (A) in the direction of the arrow until it is
removed from the bracket spring.
25/54