Rear Panel Connections Overview - Zenith XBS344 Installation And Operating Manual

Rear Panel Connections Overview

VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/Monitor, another VCR).
RF.OUT (DVD/VCR OUT)
Connect to a TV with RF coaxial inputs.
Connect the VHF/UHF/CATV
antenna to this terminal.
AC Power Cord
Plug into the power source.
Connect to a S-Video Input on TV. FOR DVD VIEWING ONLY.
Dust Protection Cap
Remove the dust protection cap from the OPTICAL
DIGITAL IN jack and connect the optical digital cable
(not supplied) securely so that the configurations of
both the cable and the connector match. Keep the dust
protection cap and always reattach the cap when not
using the connector to protect against dust intrusion.
10
DVD/VCR OUT (VIDEO/AUDIO (Left/Right))
Connect to a TV with video and audio inputs.
ANT.IN
S-VIDEO OUT (DVD OUT)
Connect the six supplied speakers to these terminals.
Connect to a digital audio output on a digital device.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs. FOR DVD VIEW-
ING ONLY.
SPEAKER Connectors
DIGITAL AUDIO IN (OPTICAL)
AM Antenna Connectors
Connect the AM antenna to these terminals.
FM Antenna Connectors
Connect the FM antenna to these terminals.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.