Storage - Flymo PowerVac 3000 Operating Instructions Manual

5. Storage

Storage:
Extended storage:
Disposal:
(in accordance with
EU-directive RL 2012/19/EU)
24
9667594-01_9667594-62 PowerVac 3000 3000-20.960.01.indd 24
Store unit unplugged, well out of the reach of children.
1. Stop unit and disconnect from the mains electricity supply.
2. Allow motor to cool before storing or transporting.
3. Store unit with all guards in place. Position unit so that any
sharp object cannot accidentally cause injury.
Prepare unit for storage at the end of the season or if it will not
be used for 30 days or more.
If your blower is to be stored for a period of time:
1. Stop unit and disconnect from the mains electricity supply.
2. Clean the entire unit before lengthy storage.
3. Open inlet cover and clean any dirt, grass, or debris that
has collected. Inspect the blower and all tubes.
Close and make sure the cover is latched.
4. Use a soft brush to clean air vents and air inlet of debris.
Do not use water.
5. Store your unit and extension cord in a well ventilated area and
covered, if possible, to prevent dust and dirt accumulation.
Do not cover with plastic. Plastic cannot breathe and may cause
condensation and eventual rust or corrosion.
6. Check entire unit for loose screws.
Replace any damaged, worn, or broken parts.
7. Remove tube(s) for easier storage.
This product must not be added to normal household waste.
It must be disposed of in line with local environmental regulations.
19.06.15 12:38