Very Important - Rowenta CLASSIC Instructions For Use Manual

PLEASE READ CAREFULLY AND KEEP IN A SAFE PLACE.
You have just purchased a oil heater, ideal for quickly heating the different rooms in your house.
This highly compact appliance can be easily stored or moved from one room to another for your comfort.
1- WARNINGS
It is essential that you read these instructions carefully and comply with the following recommendations.
• For your safety, this appliance complies with the applicable standards and regulations (Low Voltage Directive, Electromagnetic Compatibility,
Environmental...).
• Before using, always check the condition of the appliance, the power socket and the power lead.
• Do not pull on the power cable or the appliance, even to unplug it from the wall socket.
• Fully unwind the lead each time before use.
• Do not place the appliance immediately below a power socket.
• Never insert objects into the appliance (e.g. needles...).
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and know-
ledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
• Do not use your appliance in a dusty room or a room where there is a risk of fire.
• This appliance is intended for domestic use only. It must therefore not be used in industrial applications.
• The warranty will be void in the event of damage arising from improper use.
• If the power cable is damaged, it must be replaced by the manufacturer, its after-sales service or a person with similar qualifications to avoid any danger.
• Furthermore : the radiator is filled with quantity of special oil which is precisely calculated to match its dimensions. Repairs requiring the body of the radiator to
be opened must therefore be carried out exclusively by the manufacturer or its After-Sales Service (the same applies if oil has been lost from the radiator.
• You must comply with the regulations concerning elimination of the oil when the heating appliance is scrapped.
• The installation of the appliance and its use must however comply with the rules in force in your country.

2- VERY IMPORTANT

• WARNING: To avoid risk of overheating, NEVER PLACE OBJECTS ON TOP OF THE UNIT.
• Keep the appliance 50 cm away from any objects (curtains, walls, aerosols, etc.)
• NEVER USE IT LYING ON ITS SIDE.
• This appliance must not be used in damp places.
• Do not use this appliance near a bath, shower, sink or swimming pool.
• NEVER ALLOW WATER TO PENETRATE THE APPLIANCE.
• Do not touch the appliance with wet hands.
• In the event of a long absence: set the switches to the position « off » and unplug the appliance.
3- VOLTAGE
• Before first use, make sure that the voltage being used corresponds to what is indicated on the unit and that the electrical installation is adapted to the
power level indicated.
• Your appliance can be used with a power plug with an earth connection. It is a class I appliance.
4- SAFETY
• In the event of abnormal overheating, a safety device shuts down the appliance and then automatically restarts it once it has cooled. If the fault persists or
gets worse, a thermal fuse shuts the appliance down definitively and it must then be taken to an approved service centre.
• If the unit tips over, a safety device automatically turns it off. When placed back in an upright position, it will once again begin to operate.
5- MOUNTING THE CASTORS
- Ensure that the radiator is positionned with the brand name and control panel facing downwards. This enables the cord wrap system (D) to be facing
upwards.
- Place the mounting between the fist and second element.
- Position the axle on both extremities of the barl, making sure that it is horizontal, the castors facing upwards (1, 2, 3).
1
- Attach the curved braket onto the tubular part by first inserting the hook, then fit the threaded end into the hole in the axle.
- Screw down the wings nuts tightly.
- Carry out the same operation for the other mounting. Place it between the last and the next to last element.
Turn over the radiator and stand it on its castors.
2
BU2520 BU2510
For this model, make sure the castors are directed outward
during the assembly.
3
GB