Timer Function - Zenith LMG340 Installation And Operating Manual

Timer Functions
Using the TIMER function you can have the radio reception and recording, CD play, tape play or auxiliary source
play and recording turned on and off at the time desired.
1 1
Press CLOCK to check the current time.
2 2
Press "TIMER" to enter the timer setting
mode. (If you want to correct the previous
memorized TIMER setting, press and hold the
"TIMER" button more than 2 seconds.)
The previous memorized timer setting for On
Time and " TIMER " appear in the display. Each
function: TUNER-CD-TAPE flash in the display
window in turn.
3 3
Press SET when the desired function
flashes.
4 4
If you select TUNER:
PLAY and REC flash in the display window
alternately for about 3 seconds. Press SET to
confirm the desired operating mode.
REC: TUNER recording and play
PLAY: TUNER play only
• If you have selected CD or TAPE,
ignore step 4.
5 5
If you have selected TUNER:
To correct a previously memorized preset
number, use the MULTI JOG SHUTTLE and
press SET.
The hour "ON TIME" display flashes.
• If you have selected CD or TAPE, ignore
step 5.
6 6
Set the turn on hour using the MULTI JOG
SHUTTLE.
7 7
Press SET to confirm the turn on hour time.
The minute display flashes.
8 8
Set the turn on minutes time using the
MULTI JOG SHUTTLE.
10
9 9
Press SET to confirm the turn on minutes
time.
The hour 'OFF TIME' now flashes in the display.
1 1 0 0
Set the turn off hour time using the MULTI
JOG SHUTTLE.
1 1 1 1
Press SET.
1 1 2 2
Set the turn off minutes using the MULTI
JOG SHUTTLE.
1 1 3 3
Press SET.
1 1 4 4
Adjust the volume level using the MULTI
JOG SHUTTLE.
1 1 5 5
Press SET.
" TIMER " appears in the display window and
the timer setting has been completed.
1 1 6 6
Turn the system off.
The selected function is automatically
switched on and off at the preset times.
To cancel or check the timer
Each time the "TIMER" button is pressed, you can
select the timer set or cancel. You can also check the
timer setting status.
To activate or check the timer, press the "TIMER"
button repeatedly so that "TIMER" appears in the
display window.
To cancel the TIMER, press the "TIMER" button
repeatedly so that "TIMER" disappears from the
display window.