Zanussi ZWF 14791 W User Manual page 17

Operating sequence
Rinse Hold : by selecting this option the
water of the last rinse is not emptied out to
prevent the fabrics from creasing.
When the programme has finished, the
Start/Pause light goes off, on the display
appears a flashing zero «
locked» icon is still visualized and the door
is locked to indicate that the water must be
emptied out.
To empty out the water, please read the
previous option steps.
6. Select the Soil Level option
Press the «Soil Level» button repeatedly, to
increase or decrease the time cycle duration of
the programmes.
It is possible to select 3 soil level: «M
The soil level icon visualized on the
and «M ».
AX
display will change to indicate which type of
soil degree you have chosen (
«M . » : select this option for heavily
AX
soiled laundry. The washing intensity will be
increased and the washing time will be
prolonged by about 10 minutes.
«M .» : Select this option for normally
ED
soiled laundry.
: Select this option for slightly soiled
«M .»
IN
items that have been used or worn for a short
time. The washing intensity will be decreases
and the washing time will be reduced by few
minutes.
», the «Door
0.00
.», «M .»
IN ED
or ).
,
Note !
Once the programme has started the «Soil
Level» cannot be changed and you must
select the previous programme with an other
soil level again.
IMPORTANT!
Not all soil levels can be selected with any
programme and, depending on the selected
programme, the machine proposes by
default a soil level, which cannot be
changed.
7 Select the Easy Iron option
Selecting this button the laundry is gently
washed and spun to avoid any creasing. In
this way ironing is easier. Furthermore the
machine will perform some additional rinses
for cotton and synthetics.
8 Select the Extra Rinse option
The machine performs some additional rinses
in some programmes (see the programmes
table).
This option is recommended for people who
are allergic to detergents, and in areas where
the water is very soft.
17