Control panel and functions
Programme selector dial and
1
On/Off switch
2
Spin reduction button
3
Options button
4
Extra Rinse button
5
Display
6
Start/Pause button
7
Delay Start button
8
Programme progress display
6
The programme selector dial allows you to select a programme
●
and/or to switch the machine on/off. It can be turned either
clockwise or anticlockwise. The light, Start/Pause starts to flash.
Press the Spin button repeatedly to change the spin
●
speed, if you want your laundry to be spun at a speed
different from the one proposed by the washing machine
or to select the Night cycle and Rinse Hold. The relevant
light will light up.
By means of the Options button, you can select only one of the
●
following options: Prewash, Intensive, Super Quick (see the
relevant chapter «Operating sequence»).
The relevant light will light up.
●
By means of this button, the machine performs some additional
●
rinses.
displa
The
y shows the following information: duration of the
●
selected programme, delayed start, incorrect option selection,
alarm codes, heating phase and end of programme.
The Start/Pause button allows you to start the selected
●
programme; the corresponding green pilot light stops flashing.
This button also interrupts a programme which is running, the
●
corresponding green pilot light starts to flash.
The wash programme can be delayed from 30 min - 60 min - 90
●
min, 2 hours and then by 1 hour up to a maximum of 20 hours
by means of this button.
The different pilot lights illuminate depending on the running
●
programme phase.