Table of Contents
Advertisement
minutes mode. An arrow on the display points
to a graph symbol when the unit is logging.
Off-load While Logging
When the logging interval is specified in
minutes it is possible to retrieve data from a
TINYVIEW without interrupting the logging
program.
Stop Options
TINYVIEW may be set to stop logging in one of
three ways:
i.
Never (wraparound). In this mode
the logger continues to record, over-
writing the oldest data first once full.
ii. When full.
iii. After a specified number of readings.
Minimum, Maximum or Actual Readings
It is possible to record minimum, maximum or
actual readings. For minimum and maximum
readings, the recorded value is calculated from
readings taken during the logging interval.
Therefore a minimum logging interval of 2
minutes is needed for these functions.
2
Advertisement
Table of Contents
