Analog Module And Pulse Counter Module Settings - Hitachi S10VE User Manual

9.4 Analog module and pulse counter module settings

Use the ladder diagram system tool to configure the analog module and pulse counter module when:
- You want to enable the MODE2 setting in an analog module
- You want to use a pulse counter module
You can skip this setting if you want to use the analog module with the MODE1 setting.
■ Settings for analog modules and pulse counter modules
For details on how to perform these settings, see the S10VE Software Manual Operation Ladder Diagram
System for Windows® (manual number SEE-3-131).
9-13
9. Settings