Select The Required Programme; Start The Machine; At The End Of The Programme - Zanussi FLS 1084 Instruction Booklet

5. Select the required programme

Turn the programme selector dial clockwise to the
required programme.

6. Start the machine

Before starting up the machine check that:
the appliance is plugged in
the water supply taps are turned on
the drain hose is correctly and securely positioned
the door and the detergent dispenser drawer are
closed.
Pull the programme selector dial outwards: the mains-on
light will illuminate and the machine starts operating.

7. At the end of the programme

The machine stops automatically and the mains-on light
goes out.
If you have depressed the rinse hold button
machine will stop with the water left in the tub, to
prevent the fabric from creasing. To drain the water
release the same button (the clothes will be gently spun)
or select programme "R".
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the programme
selector dial.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
P0215S
P0216S
, the
10