NETGEAR AV Series Hardware Installation Manual page 9

surge protector inline between the switch and the outdoor device. Failure to do
so can damage the switch.
- Before connecting this switch to outdoor cables or devices, see
https://kb.netgear.com/000057103 for safety and warranty information.
-
Failure to follow these guidelines can result in damage to your NETGEAR product,
which might not be covered by NETGEAR's warranty, to the extent permissible
by applicable law.
• Observe and follow service markings:
- Do not service any product except as explained in your product documentation.
Some devices should never be opened.
- If applicable to your product, opening or removing covers that are marked with
the triangular symbol with a lightning bolt can expose you to electrical shock.
We recommend that only a trained technician services components inside these
compartments.
• If any of the following conditions occur, unplug the product from the power outlet
and replace the part or contact your trained service provider:
- Depending on your product, the power adapter, power adapter cable, power
cable, extension cable, or plug is damaged.
- An object fell into the product.
- The product was exposed to water.
- The product was dropped or damaged.
- The product does not operate correctly when you follow the operating
instructions.
• Keep your product away from radiators and heat sources. Also, do not block cooling
vents.
• Do not spill food or liquids on your product components, and never operate the
product in a wet environment. If the product gets wet, see the appropriate section
in your troubleshooting guide, or contact your trained service provider.
• Do not push any objects into the openings of your products. Doing so can cause
fire or electric shock by shorting out interior components.
• Use the product only with approved equipment.
• If applicable to your product, allow the product to cool before removing covers or
touching internal components.
Introduction
AV Line of Fully Managed Switches M4250 Series
9 Hardware Installation Guide