Fluke 772 Instruction Sheet page 4

Milliamp process clamp meter
Hide thumbs Also See for 772:
Table of Contents

Advertisement

Table 1 explains the symbols that are used on the Meter or in this
Instruction Sheet.
Symbol
W
X
-
T
P
)
~
Table 1. Symbols
Consult user documentation.
WARNING. RISK OF DANGER.
WARNING. HAZARDOUS VOLTAGE. Risk of electric shock.
Power on/off
Do not apply around or remove from uninsulated hazardous
live conductors without taking additional protective
measures.
Double Insulated
DC (Direct Current)
Earth Ground
Battery
Conforms to European Union directives.
Conforms to relevant Australian Safety and EMC standards.
Certified by CSA Group to North American safety standards.
Measurement Category II is applicable to test and measuring
circuits connected directly to utilization points (socket outlets
and similar points) of the low-voltage MAINS installation.
Measurement Category III is applicable to test and
measuring circuits connected to the distribution part of the
building's low-voltage MAINS installation.
Measurement Category IV is applicable to test and
measuring circuits connected at the source of the building's
low-voltage MAINS installation.
This product complies with the WEEE Directive marking
requirements. The affixed label indicates that you must not
discard this electrical/electronic product in domestic
household waste. Product Category: With reference to the
equipment types in the WEEE Directive Annex I, this product
is classed as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this product as
unsorted municipal waste.
Explanation

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

773

Table of Contents