General Information - Master MVP-150XL Operation

General Information

General Information Information
General General Information
Install all products in accordance with manufacturer's
recommendations, and local codes and regulations.
NOTE: For outdoor applications, be sure to provide
NOTE: NOTE:
adequate protection from the elements.
System Components System System Components Components
B Pump outlet
C Pump inlet
D Pump head CO port and valves
2
F
CO regulator assembly
2
J CO supply line from regulator
2
6
The Typical Installation shown below is only a guide
for selecting and installing system components.
Contact your MVP distributor for assistance in
planning a system to suit your needs. Always use
Genuine MVP Parts and Accessories. Be sure all
accessories are adequately sized and pressure rated
to meet the system's requirements.
Reference letters in the text, for example (A), refer to
the callouts in the figures.
Required Required Components Required Components Not Components
A Hazardous location electrical connection
E Liquid prevention auxiliary device
G *ON/OFF switch or motor starter
H
CO supply tank
2
* A C1D1-rated ON/OFF switch can be located within the
hazardous location.
Not Supplied Not Supplied Supplied
3A6887A