Technical Data; Parts Of The Device; Set-Up/Start-Up - Festool TKS 80 EBS Original Instructions Manual

English
– Saw blade dimensions: 254 x 30 x 2.4 mm
– Cutting width > 2.2 mm (corresponds to the
tooth width)
– Locating bore, dia. 30 mm
– Standard blade thickness < 1.8 mm
– Saw blade with chip angle of ≥ 15°
– Suitable for speeds of 3500 min
Festool saw blades comply with EN 847-1.
4

Technical data

Bench-mounted circular saw
Power
TKS 80 EBS 220 V
Speed (no-load)
Locating bore
Cutting height at 90°/45°/47°
Mitre angle
Table dimensions (L x W)
Table height, legs unfolded
Table height, legs folded away
Weight as per EPTA procedure 01:2014
5

Parts of the device

[1-1]
Accessory holder
[1-2] Side handle areas
[1-3]
4 V-profiles
[1-4] Spacer wedge for grooving
[1-5] Table insert
[1-6] Spacer wedge with protective cover
support
[1-7]
Protective cover
[1-8] Safety sticker
[1-9] Preset profile setting rail
[1-10] Fine adjustment
[1-11] Mitre angle setting
[1-12] Rotary knobs for foldaway legs
[1-13] Scale
[1-14] Cutting height setting
[1-15] Angle indicator
[1-16] Push stick holder
[1-17] Foldaway legs
30
Only saw materials for which the saw blade in
question has been designed.
Saw blades made of high-alloy high-speed steel
(HSS steel) must not be used.
3.2
Only use Festool cartridges that are designed
or above
-1
for use in this power tool.
[1-18] Closing flap
[1-19] Switch panel
[1-20] Transport rollers
[1-21] Shipping protection
The illustrations specified are located at the be­
ginning and end of the operating instructions.
6
Heavy transport packaging with bench-
mounted circular saw
Risk of injury
► The transport packaging with the bench-
mounted circular saw must be carried and
unpacked by two people.
Cartridges
0–80 mm/0–56 mm/0–54 mm

Set-up/start-up

CAUTION
TKS 80 EBS
2200 W
1700–3500 min
-1
Dia. 30 mm
-2°–47°
690 x 580 mm
900 mm
375 mm
37.0 kg